Firmware V5.15.49
September 19th, 2024
- Fixed: Further improvements to the robustness of the connection between PrepInlay and LunaBulb
- Added: Color identifier on LunaBulbs for connection confirmation with PrepInlay
Firmware V5.15.45
August 7th, 2024
- Fixed: Improved robustness of the connection between PrepInlay and LunaBulb
Firmware V5.15.36
May 17th, 2024
- Added: LUNA and LUNA CASE
Firmware V5.14.78
June 17st, 2024
- Fixed: BTB lights do not recognize wired DMX on DC connector, only after being re-plugged
- Fixed: Hyperion BTB cannot detect wired DMX sometimes, stops again after a few seconds (related to if its charging or not!)
- Fixed: Occasional flicker on BTB ligths while running from wired DMX
- Fixed: Unstable CRMX after the RDM update eventually leading to CRMX NOT INSTALLED messages.
Firmware V5.14.70
May 21st, 2024
- Fixed: sound to light in ART7 and ART7WIFI did not work properly
Firmware V5.14.69
April 10th, 2024
- Fixed: lights may suddenly turn to MAX brightness while on another runtime setting.
- Fixed: occasional short blackout of PLUTO
- Fixed: occasional reboot of BTB lights (can cause short blackout)
- Fixed: Wi-Fi can't connect in some scenarios for ART7-WIFI
Firmware V5.14.64
Jan 29th, 2024
- Fixed: Leo Fresnel drains battery even while connected to AC
Firmware V5.14.61
Jan 26th, 2024
- Added: additional highlighting features, including the ability to choose highlight colors and highlight based on sound
- Added: new DMX profiles with CCT crossfade to RGB
- Added: new DMX profiles with fan control
- Added: support for new white remote, ARC3
- Fixed: DMX effect modes do not work on wired DMX for PB15
- Fixed: OLED doesn't dim down after 30 seconds.
- Fixed: Bluetooth bonding did not remember more than one connections, on BTB lights and ART7-WIFI, now 8 are remembered.
- Fixed: Hyperion restarts when doing layer effect in some cases
- Fixed: theft alarm triggers for no reason on newer BTB lights
- Fixed: Hydra draws too much power on PB2X86
- Fixed: Wi-Fi connection LED for ART7 was previously activated whenever any Wi-Fi client connected, instead of when the App connected.
- Fixed: default setting for PWM frequency was not applied when doing RESET SETTINGS
- Fixed: firmware update is experiencing issues in certain instances
- Fixed: spurious PWM Driver errors
- Fixed: background update could not handle large update files
Firmware V5.14.24
May 23th, 2023
- Added: RDM over CRMX
- Fixed: sometimes BTB lights could not receive a firmware update properly
- Fixed: NYX DC input is now showing correctly in the App again
- Fixed: lights cannot be moved to a new radio pin while in DMX mode
- Fixed: holding down the powerbutton to poweron no longer resets the lights
- Fixed: unstable brightness in 20h mode on Pluto
- Fixed: charging stopped by over temperature issue on ART7WIFI
Firmware V5.14.16
April 21th, 2023
- Added: ART7WIFI, LEO, PLUTO
- Added: Loads calibration even in problematic cases
- Fixed: Rare issue of lights getting totally stuck
- Fixed: Holding + or - buttons on keypad stops again where it should
- Fixed: incorrect screen flip on some devices
Firmware V5.12.97
Okt 10th, 2022
- Fixed: occasional OLED blackout during charging.
- Fixed: occasianal pixel flicker in Hyperion BTB.
Firmware V5.12.96
August 30th, 2022
- Added: combined Hydras now share effects and auto DMX address
- Added: "DMX Tester" for ART7 now works
- Fixed: occasional black flicker after CRMX2 update.
- Fixed: logfile download into app works again.
Firmware V5.12.90
July 6th, 2022
- Fixed: Link by LINK KEY now works as expected, both on ART7 and on lights
- Fixed: Link by LINK KEY sets INPUT SELECT when triggered by App
- Fixed: Fix a 2nd cause for CRMX white flashes on BTB lights
Firmware V5.12.88
June 30th, 2022
- Fixed: memory leak in faster list of lights
- Fixed: AX2 unstable brightness in cyan
- Fixed: AX2 UI frozen issue
- Fixed: charger clicking noise in Hyperion BTB
- Fixed: Hydra ControlSync freeze issue
- Fixed: AX9 charging contacts are working again
Firmware V5.12.85
June 6th, 2022
- Added: HyperionBTB support
- Added: N32 support for PB15
- Added: N32 support for AX5BTB
- Added: faster list of lights support
- Fixed: app connection bug of 5.12.67
Firmware V5.12.67
May 25th, 2022
- Added: CRMX2 support
- Added: option to revert back to old firmware by holding power button 15s during start for BTB lights
- Added: RF Region can now be displayed and changed in the RADIO PIN menu
- Added: HYDRA, AX1BTB, AX5BTB, HYPERIONBTB
- Added: support for alternative component N32 for BTB lights
- Added: we can now detect other systems running the same RADIO PIN
- Added: move lights to new radio pin
- Improved: shelf battery life for BTB lights
- Fixed: runtime in >15h is now correct for AX2, AX9, PB15
- Fixed: standby bug of 5.11.26
- Fixed: flicker on tubes in certain conditions (DMX)
- Fixed: flicker when DMX FAIL is used
- Fixed: freeze in XY DMX modes
- Fixed: CRMX2 Universe name not read in ART7 RX mode
- Fixed: Alarm message is shown even when fixture number is on the screen in large letters
- Fixed: lights rebooting after leaving standby mode
Firmware V5.11.26
December 16th, 2021
- Fixed: BTB tubes can now work on any wired DMX address without loosing channels
Firmware V5.11.25
December 9th, 2021
- Fixed: BTB lights now support the Onboard lights assistant
- Fixed: sometimes the light name was deleted after updating to 5.11.21
- Fixed: random crash in ART7 during the log file download
Firmware V5.11.21
November 21th, 2021
- Fixed: Sometimes firmware update does not install.
- Fixed: BTB lights can now set the fixture number in batch mode.
Firmware V5.11.20
November 05th, 2021
- Fixed: laggy menu when in CRMX mode but no input is present.
- Fixed: AX2 CRMX to XLR works now properly.
- Fixed: NYX Fixture Number can be edited with the powerstation.
Firmware V5.11.15
October 04th, 2021
- Added: fixture number is shown in large letters and can be changed on the light.
Firmware V5.11.14
September 20th, 2021
- Fixed: fixture name not saved.
- Fixed: CRMX actions its called "linked" now.
Firmware V5.11.12
September 19th, 2021
- Fixed: BTB lights rebooting sometimes on RESET SETTINGS
- Added: logfile download to the App
Firmware V5.10.23
September 08th, 2021
- Fixed: Effect mode DMX profiles are now working for NYX bulb
Firmware V5.10.22
August 30th, 2021
- Fixed: Titan-BTB loads calibration always now
- Fixed: removed random color-flicker on AX3 and AX7
Firmware V5.10.21
August 17th, 2021
- Added: turn a light by 180° from the menu
- Added: name of the light is now shown at the lights control panel
- Added: a fixture name can be assigned to the light
- Fixed: incorrect RDM profiles reported for AX5
Firmware V5.9.67
July 12th, 2021
- Added: bluetooth icon now shown in display
- Fixed: bluetooth master stops the UHF network latest after 5 minutes
- Fixed: ship mode is working for new products
- Fixed: small time delay between bluetooth master and other lights
- Added: support for new accelerometer types
- Fixed: AX9 does not charge properly in the charging station
- Fixed: 4xPB15 does not charge properly on a 15m cable
- Fixed: calculation error in HSI algorithm
- Fixed: many smaller stability issue for NYX bulb (updated SDK)
- New: option to stop charging at 80%, needed internally for Astera
- First internal release for upcoming products with Bluetooth
Firmware V5.9.33 for NYX
April 8th, 2021
- Fixed: master pin is always correctly saved
- Fixed: CRMX sometimes did not start after power on
- Fixed: NYX new reliably starts the CRMX while no ART7 is present and INPUT SELECT is set to CRMX
Firmware V5.9.20
March 14th, 2021
- Fixed: PROFILE BY NUM inputs are now always saved
- Fixed: AX2 now displays the auto DMX patching correctly
- Fixed: NYX connects by bluetooth correctly on every try
- Added: sensor mode of AX7 can now be set
Firmware V5.9.19
Feb 11th, 2021
- New: support for new LED driver chips
Firmware V5.9.18
Jan 19th, 2021
- Fixed: AC FAIL = POWEROFF works correctly again for the lights
- Fixed: AC FAIL = POWEROFF does no longer power off the ART7
- Added: AX2 auto-configuration by IR communication
- Fixed: flash happening sometimes in Knight-Rider effect
Firmware V5.9.17
Nov 26th, 2020
- New: Bluetooth support for NYX bulb
- Fixed: sometimes NYX was slightly flickering on AC
- Fixed: colors are much more accurate for NYX bulb
Firmware V5.8.68
Oct 6th, 2020
- Fixed: ONE PIXEL in layers works again
- Fixed: spurious corrupted RF commands
- Fixed: reference voltage error on startup
- Fixed: configuration error on startup
- Fixed: RF and/or motion sensor stopped working after long time
- New: AX2 PixelBar is now supported
Firmware V5.8.64
Sept 8th, 2020
- New: fast startup of lights
- Fixed: profile 137 was missing the strobe
- Fixed: NXY was flickering in certain slow fades
- New: NXY Powerstation battery level now shown in App and tracked more accurately
- Fixed: NXY rebooting when changing STANDALONE PROGRAMs
- Fixed: incorrect layer effects display on lights with one pixel
- New: DMX profiles can now be selected by their number
- Fixed: RGB values are now correct for profile DIM CCT GM CRO RGB