Firmware V5.9.20

March 14th, 2021

- Fixed: PROFILE BY NUM inputs are now always saved
- Fixed: AX2 now displays the auto DMX patching correctly
- Fixed: NYX connects by bluetooth correctly on every try
- Added: sensor mode of AX7 can now be set
- New: support for new LED driver chips
- Fixed: AC FAIL = POWEROFF works correctly again for the lights
- Added: AX2 auto-configuration by IR communication
- Fixed: flash happening sometimes in Knight-Rider effect

Firmware V5.8.68

Oct 6th, 2020

- Fixed: ONE PIXEL in layers works again
- Fixed: spurious corrupted RF commands
- Fixed: reference voltage error on startup
- Fixed: configuration error on startup
- Fixed: RF and/or motion sensor stopped working after long time
- New: AX2 PixelBar is now supported

Firmware V5.8.64

Sept 8th, 2020

- New: fast startup of lights
- Fixed: profile 137 was missing the strobe
- Fixed: NXY was flickering in certain slow fades
- New: NXY Powerstation battery level now shown in App and tracked more accurately
- Fixed: NXY rebooting when changing STANDALONE PROGRAMs
- Fixed: incorrect layer effects display on lights with one pixel
- New: DMX profiles can now be selected by their number
- Fixed: RGB values are now correct for profile DIM CCT GM CRO RGB

Firmware V5.8.9

Nov 15th, 2019

- Fixed: CCT overwrites Strobe

Firmware V5.8.7

Oct 28th, 2019

- Added: knightride in layer geometry
- Fixed: AX3 24FPS 1200hz flicker issue in D CCT GM X RGB mode

Firmware V5.8.5

Oct 18th, 2019

- Fixed: speed fader

Firmware V5.8.4

Oct 16th, 2019

- Added: layer effects
- Added: "AC FAIL" setting "POWER OFF"
- Improved: ART7 LINK button press
- Fixed: boot loop on Titan
- Fixed: flickering in DMX HSI profile
- Fixed: spurious 1second wakeup during power off
- Added: battery rescue mode
- Fixed: corruption of log files
- Fixed: compensation of resistance during charge was not working
- Fixed: ART7 could draw too much current in off mode and keep bluetooth on

Firmware V5.7.142

July 17th, 2019

- Fixed a problem for some lights getting stuck in the bootloader after update.

Firmware V5.7.141

July 15th, 2019

- Fixed for AX5: variation in the brightness for long runtimes or while in the charging case

Firmware V5.7.130

July 6th, 2019

- Fixed: High Speed PWM Switch in Anti-Flicker Popup for AX5

Firmware V5.7.129

June 14th, 2019

- Fixed flicker in RGB CCT DIM IND profile
- Fixed color lockup in APP mode after DMX was used
- AX-Tubes: all have 4 Pixel modes (1, 1/4, 1/2, full) now

Firmware V5.7.117

Feb 25th, 2019

- Titan: removed flicker when running in CRMX and supplied from DC
- improved the DMX filter to avoid ghosting when running the AX1/Titan from a console
- updated the Japan region
- updated the Korea region
- Russia region is now final and approved
- fixed a problem in the iOS/ART7 communication regarding Anti Flicker

Firmware V5.7.101

Dec 22th, 2018

- AX5: fixed distorted DMX output in CRMX to XLR mode while charging.

Firmware V5.7.96

Oct 24th, 2018

- Added RF Region Japan

Firmware V5.7.95

Oct 15th, 2018

- Fixed: Titan Tubes turn off by themselves
- Fixed: buffer overflow in bluetooth of ART7

Firmware V5.7.91

Sept 4th, 2018

- Fixed: AX5 stops responding on XLR DMX if RDM is used for a while.

Firmware V5.7.85

July 27th, 2018

- Added XLR output of the received CRMX universe for AX5

Firmware V5.7.35

May 27th, 2018

- Fixed: ART7 CRMX does not pair reliably to all ligths

Firmware V5.7.34

May 25th, 2018

- Fix for ART7 and iOS
- Fixed: bluetooth module sometimes did not power off correctly
- Fixed: AX5 flashes on XLR DMX input if not connected to an AsteraBox
- Added FP1

Firmware V5.7.22

Apr 16th, 2018

- Fix for ART7 that loose the connected lights and/or are unreliable in talking to the lights
- Fix for AX1: the brightness of the stick was usually at full already around 50% setting.
- New feature for AX1: the DMX address/profile can now be set by shaking the tube in blue mode

Firmware V5.7.16

Mar 7th, 2018

- Fixed an issue with the ART7 in CRMX transmitter mode. Transmitter does not get stuck anymore and does not drop frames.
- Prepared the ART7 for the iOS App

Firmware V5.6.74

Feb 7th, 2018

- Improved the interference immunity in the European region when controlled by App.

Firmware V5.6.72

Feb 2th, 2018

- Wired RDM support for the AX5.
- Optimized the charger to prevent some errors that lead to "Idle, wait" message.
- Improved the error messages during charging. Lights now clearly tell if it is too hot or too cold.
- Increased the allowed temperature range for AX5 to 2�C - 45�C.
- Fixed: AX5 lost wired DMX signal connected to a Lightcomander48 after signal interference.

Firmware V5.6.64

Nov 9th, 2017

- CRMX Firmware update for receivers and transmitters: should fix problems with half frames received during high speed changes
- AX1: fix problems during charging that showed red and blue blinking on some lights
- ART6/7: fixed a problem with the box restarting during firmware update
- All lights: standby is automatically entered if in CRMX mode and signal is lost while the output is dark. Standby times are slightly reduced due to the receiver staying active
- All lights: in order to prevent drained batteries due to light accidently stored in standby instead of off-mode, the lights now power off at about 10% battery state if the standby mode was active for more than 24h
- Fixed rounding error: lights show now 100% after being charged, no longer just 99%

Firmware V5.6.42

Oct 18th, 2017

- AX1: fix different brightness on AC

Firmware V5.6.41

Oct 16th, 2017

- AX7: fix blackout issue

Firmware V5.6.34

Oct 2th, 2017

- ART6/7 fix issue with disconnection on standby

Firmware V5.6.33

Sept 29th, 2017

- AX5 fix issue with charging plate

Firmware V5.6.29

July 27th, 2017

- AX1,AX7,AX10 lights no longer reboot in standby mode

Firmware V5.6.26

July 19th, 2017

- AX1,AX7,AX10 do no longer stop and start randomly

Firmware for AC4

July 14th, 2017

- updated firmware for AC4 controller to fix a problem where the pixel count reverts to 170 pixels in Art-Net mode.

Firmware V5.6.23

July 7th, 2017

- fixed an issue with some lights waking from standby without reason

Firmware V5.6.22

July 5th, 2017

- Dimmer curves are now available for all lights
- Processing is now completely changed to 16bits
- Fixed reduced dimming range for AX1
- Improved the RF quality in polluted RF environments in the US region
- AX3 is prepared to work with the external battery pack
- Improved color reproduction for AX5 and other lights

Firmware V5.6.7 Beta

- Removed any flicker for AX3,7,10
- Supports new BPU
- DMX dimming is smoother

Firmware V5.5.132

Mar 24th, 2017

- All Lights: Fixed missing channels in the Effect Mode RGB profile while controlled by wireless DMX
- AX1: Fixed missing channels in the Effect Mode RGB profile while controlled by wireless DMX